☰ CATEGORY
전자상가
음반
삼성이 내놨던 희대의 망작 핸드폰 옴니아란 이름이 아직 한국에서는 생생하지만 오디오랩에서는 이런걸 알길이 없으니 옴니아란 이름을 붙였겠죠. 뭐 원래 상관없는 제품이기도 하지만요. 다만 그런 불길한 기운이 미치지 않기를 바랄뿐입니다.
라틴어로 전지전능이란 뜻을 가진 옴니아란 이름에 걸맞게, 네트워크 플레이어에 앰프, 그리고 룬과 MQA 지원 등은 기본이고 요샌 보기힘든 CD Player와 Phono단까지 갖췄습니다. 여기에 액정에서 구현되는 것이긴 하나 VU미터도 넣었네요.
이쯤되면 멀티룸 기능 지원이나 각종 디지털 포맷 재생같은걸 말할 필요도 없겠습니다.
가격은 £1,599
| General Description | Integrated Amplifier | |
| Design Philosophy and Core Technology | 2x50W (8ohm) / 2x75W (4ohm) Class AB | |
| ES9038Q2M 32-bit DAC | ||
| - 4.3" (800x480mm) large size full view IPS LCD | ||
| Built in certified hardware MQA Full decoder (PC USB, Coax/Optical) | ||
| CD playback compatible with CD, CD-R, CD-RW discs | ||
| USB memory device support (MP3/WMA/AAC/WAV) | ||
| DTS Play-Fi technology (IEEE 802.11 a/b/g/n/ac) | ||
| Streaming service support includes Amazon Music, Spotify, TIDAL, KKBox, SiriusXM, Napster, Internet Radio, Deezer, iHeartRadio, PANDORA, Qobuz, QQmusic and more | ||
| Multi-room / multi speaker group support | ||
| Bluetooth 5.0 (aptX/aptX LL) streaming | ||
| Low Noise Moving Magnet Phono stage | ||
| Dedicated Current-Feedback Headphone AMP | ||
| Integrated / PRE-POWER / PRE only Modes | ||
| Android / iOS / Kindle Fire / Windows PC Control Support | ||
| USB firmware upgrade input | ||
| Inputs | 3 x Analogue, 1 x Phono (MM) , 1 x Power Amplifier, 2 x SPDIF (Coax), | |
| 2 x SPDIF (Optical), 1 x DTS Play-Fi Streaming, 1xPC USB(USB B), | ||
| 1xUSB HDD(USB A), 1 x Bluetooth(aptX/aptX LL), 1 x 12V Trigger | ||
| Outputs | 1 x PRE Amplifier, 1 x Stereo Speaker, 1 x Headphone, 1 x 12V Trigger | |
| Sampling Frequency | Optical / Coaxial:44.1kHz ---192kHz | |
| Optical / Coaxial: 44.1kHz ---192kHz PC USB: 44.1kHz - 768kHz (PCM) / DSD64, DSD128, DSD256, DSD512 | ||
| Preamplifier Section | ||
| Gain | +8dB (Line) | |
| +47dB (Phono MM) | ||
| Input Sensitivity | 720mV (Line, Volume = 0dB) | |
| 3.1mV (Phone MM, Volume=0dB) | ||
| Input Impedance | 10K (Line) | |
| 47K // 100pF (Phono MM) | ||
| Total Harmonic Distortion (THD) | < 0.0004% (1KHz @ 2V, Volume = 0dB) | |
| Frequency Response | 20Hz-20kHz (+/-0.1dB) | |
| Output Voltage | 2.3V max. (Volume = 0dB) | |
| Output Impedance | 100 ohm | |
| Signal-to-Noise Ratio | >110dB (Line,A-weighted) | |
| 76dB (Phono MM,A-weighted) | ||
| DAC | ||
| D to A Converte | ES9038Q2M | |
| Total Harmonic Distortion (THD) | < 0.0006% (1KHz @ 0dBFS) | |
| Output level (0dBFS, 1KHz) | 2.1Vrms | |
| Max. Sampling Frequency | Optical, Coaxial: 192KHz | |
| Ethernet,Wi-Fi: 192KHz | ||
| USB A：48kHz | ||
| PC USB: PCM768kHz, DSD512 | ||
| Signal-to-noise Ratio (S/N) | 114dB (A-weighted) | |
| Power Amplifier Section | ||
| Gain | +29dB | |
| Rated Power Output | 2 x 50W (8 ohm, THD < 1%) | |
| 2 x 75W (4 ohm, THD < 1%) | ||
| Frequency Response | 20Hz-20kHz (+/-0.3dB) | |
| Total Harmonic Distortion (THD) | < 0.003% (1kHz @ 40W / 8ohm) | |
| Input Sensitivity | 720mV | |
| Signal-to-Noise Ratio (S/N) | 110dB (A - weighted) | |
| Max. Output Current | 9A | |
| Headphone Amplifier | ||
| Total Harmonic Distortion (THD) | < 0.01% (1kHz, 50mW ) | |
| Output Impedance | 10ohm | |
| Load impedance | 20-600 ohm | |
| General | ||
| Standby Power Consumption | < 0.5W | |
| Net Weight | 9.1kg | |
| Gross Weight | 11kg | |
| Dimensions (mm) (W x H x D) | 440 x156 x 327 | |
| Carton Size (mm) (W x H x D) | 540 x 412 x 210 | |
| Finish | Black / Silver | |
| Power Requirements (depending on region) | 220-240V ~ 50/ 60Hz | |
| 100-120V ~ 50/ 60Hz | ||
| Standard Accessories | Power Cord, Remote Control,User Manual, Antennas, etc. |