리케이블(RiCABLE) INVICTUS Bridge 점퍼케이블입니다.

이탈리아의 케이블 제조사로 MARC(Multicore Annealed Ricable Conductor) 기술의 향상된 7N(99.99999%) 구리도체를 기반으로 소리의 투명도, 에지, 질감 표현이 강점인 풍부한 사운드를 들을수 있는 리케이블(RiCABLE) Invictus Reference 시리즈 최상급 점퍼케이블입니다.
고순도 7N MASC 구리 도체와 완벽한 접지의 커넥터, RNR 테크놀러지(Ricable Noise Reduction), 신호손실 '0'에 가까운 절연체등 Invictus 시리즈의 정교한 기술력이 투입되었으며, 고순도 구리도체의 장점인 정연한 대역밸런스를 중심으로 각 악기의 생생함과 자연스러움을 유지하며, 음악의 깊은 감성을 이끌어 내주는 케이블입니다.
길이는 18cm 페어 양쪽 말굽단자 완제품입니다.

신품입니다.
판매가는 38만원입니다.


Set of jumpers for connecting High and Low terminals of high fidelity acoustic speakers. Ideal in conjunction with Invictus Speaker Reference cables. MARC 7N Copper conductor and Pure Copper connectors.

Invictus Bridge
Your Hi-Fi system is like a Puzzle in which each component plays an important role in constituting the final picture. Attention to detail is important to ensure smooth, unobstructed listening of the signal, starting from the source, all the way to the acoustic speakers. Invictus Bridges are born with the intention of offering the ultimate in replacing your speakers' stock jumpers. Often high-end acoustic speakers, have 4 binding posts because they offer the option of Bi-Wiring or Bi-Amping drive. If they are not used in such configurations, the "Hight Level" binding posts should be connected to the Low Level binding posts. All Loudspeaker manufacturers provide jumpers, which are generally represented by a poor quality brass plate. This situation brings enormous disadvantages in reproduction, because the signal Speaker is not transmitted with the same purity as from the amplifier, when quality Speaker cables are adopted. To remedy this situation and have the maximum sound performance, simply replace the supplied jumpers with Ricable Invictus Bridges, thus you will put your system in the best condition for reproduction.

Salient Features
Ricable Invictus Bridges are designed to best assist our Top of the Range cables, but are of course also suitable with lesser Speaker cables.

MARC CONDUCTOR 70% compared to OFC: 7.60 mm2 Invictus Reference conductors made of 7N MARC (Multicore Annealed Ricable Conductor) Copper with strands 0.08 mm with smoother and more compact surface allowing 70% better audio transmission than OFC Copper.

COMPROMISE-FREE CONSTRUCTION: Hexaphonic geometry with 1038 triple-twisted structured wires on a polymer-insulated central conductor.

FOR ALL NEEDS: Invictus Bridge are available in two versions. With Pure Copper Forks on both sides or with Forks on one side and Copper/Tellurium Bananas on the other side. Their high flexibility and length of 18 cm allow them to be used in all acoustic loudspeakers, both when the terminals are very close together and when they have large distances between them. The spades double cantilevers accept all types of clamps with diameters up to 8 mm.

HANDMADE IN ITALY BY RICABLE: Every step of production is done totally by hand, and checks on every single piece are manic, using new tools and testing procedures, but above all with the help of meticulous human control. From the combination of Technology and Italian Craftsmanship, INVICTUS Made in Italy cables are born.