어쿠스틱 에너지 AE3 reference MK2 스피커입니다.


명석함과 유연함을 겸비한 북셀프 AE1 mk3에 스케일과 응답특성을 더욱 개선시킨 3웨이 톨보이 스피커입니다.
하단에 장착되어 저역을 담당하는 6.5인치 더블우퍼는 중고역 유닛과 완벽히 일치된 속도감과 빠르게 반응하는 광대역의 베이스를 확보하여 낮은 레벨에서도 순도높은 해상도를 표현 해주고 있으며, 전체적으로 늠름하고 우아한 음색을 들려주는 제품입니다.
미러 광택의 두꺼운 피아노 도장, 우퍼부의 다이어프램, 그리고 중량급 메탈로 이루어진 베이스 플레이트에서 노이즈와 공진을 배제한 치밀한 설계와 예술적인 감각까지 느낄수 있습니다.

상태 좋습니다.
판매가는 480만원이고 다른제품과 절충교환 가능합니다.-----400만원으로 인하합니다.


AE3 Mark II
HF Unit---Doped fabric diaphragm. Central clamp and phase corrector. Me-tal chassis, directly interfaced with Reference One alloy plate baffle for low vibration. Shielded neodymium cup magnet system. Low fundamental resonance for lowest coloration and improved linearity

Mid Unit---100mm diameter, magnesium die cast chassis. Open low reflection frame design. High performance closed field neodymium magnet system. Low stray field. Vented rear suspension. Air pumped cooling. Low loss outer suspension. Non-conductive glass fibre voice coil former. Precision 32mm power voice coil.
105mm Pure Piston hyperbolic aluminium alloy cone, depth anodised to traditional AE practice.

Bass Unit---Twin 125mm mid/bass drivers with 26mm voice coil, die cast chassis, high power, magnet system and lightweight alloy cone. Magnetically shielded.

Crossover---Delivers octave by octave equilisation for maximum monitor grade tonal accuracy.

3rd order acoustic, phase corrected; drivers are wired in phase electrically. Crossover elements 14, close tolerance components [+/-2% typical].

Vibration inhibited platform, low colouration power film resistors on alumina substrate. Selected high current audiophile grade laminated core low loss inductors plus air core for high frequency section. Selected audiophile grade polypropylene capacitors.

Power Handling---125 W Peak programme
Amplifier compatibility: 100 ? 250 Watts into 8 Ohms
Frequency Response---42Hz ? 20kHz, +/-2.5dB
Frequency Range---24Hz ? 30kHz @ -6dB
Sensitivity---90dB
Impedance---Nominal 6ohms (minimum 4.6 ohms)
Terminals---Single-wire, heavy duty gold plated WBT terminals for wire, spade, and 4mm connection. Fully insulated. Internal wiring: single strand silver PTFE insulated.
Enclosure---10mm thick alloy plate baffle for essentially zero flexure. Duo-wall MDF/steel plate panel construction. Screwed in baffle and rear panel. High mass for low distortion launch of dynamic transients and superior resolution of low level detail
Plinth---30mm thick solid Aluminium.
Dimensions WxHxD---185mm x 990mm x 290mm
Weight (exc packaging)---40kg