카노르(Canor) PH 2.10 진공관 포노앰프(극상품)입니다.


4개의 진공관(12AX7*2 12AT7*2)을 사용, 카트리지의 특성에 상관없이 모든 타입 카트리지의 정밀한 세팅이 가능하며 노이즈없이 투명한 질감의 아날로그 사운드를 재생할수 있습니다.
진공관 설계로 싱싱한 현악기의 울림과 안정된 음조의 깊이있는 사운드가 돋보이며, 광대역의 사운드 스테이지와 정숙한 배경, 뛰어난 음의 밀도감과 S/N비를 갖춘 제품으로 아나로그 음향의 질감 표현에 있어 탁월한 실력을 보여주는 포노스테이지입니다.

정식수입 220볼트, 원박스 있으며 상태 극상품입니다.
판매가는 460만원입니다.

MM: 50,150,270,370,520,620,740 및 840pF/이득: 46dB
MC: 10,20,40,80,150,300,600 및 1200옴/이득: 70dB
출력 임피던스: 500Ω
입력: RCA – MM / RCA – MC
출력: RCA
총 고조파 왜곡: MM / MC <0,2% / 1V RMS
아음속 필터: 18dB / 옥타브
RIAA 정확도: 0,3dB / 20Hz – 20kHz
신호 대 잡음비 MM: 84dBV
신호 대 잡음비 MC: 80dBV
튜브 보완: 2x 12AX7, 2x 12AT7
힘: 230V / 50Hz / 50VA
크기(폭x높이x깊이): 435 x 120 x 405mm
무게 : 14kg

Canor PH 2.10 Tube Phono Preamplifier
CANOR PH 2.10 is an all-tube phono preamplifier for MM and MC cartridges. It contains the minimum number of amplification steps required to apply purely passive corrections.

Canor PH 2.10 Highlights
01 Without any global feedback, which results in excellent sound performance
02 It contains the minimum number of amplification steps required to apply purely passive corrections
03 Designed for both MM and MC cartridges with high variability of resistances and capacitances settings

Product features

It allows an exceptionally large variability of gain adjustment and selection of the correct values of resistances and capacitances for all types of transmissions.
The MC cartridges are connected to the preamplifier input using a high-quality Lundahl step-up transformer.
To remove mechanical hum, the transformer core is vacuum impregnated and the entire transformer is encapsulated in a special anti-vibration compound.
The primary and secondary windings of the transformer are separated by a shielding copper foil with a 50 % overlap, which prevents the penetration of interfering voltages from the network.
Only high-quality polypropylene capacitors are used in the signal path. The RIAA correction is passive and consists only of quality polystyrene and polypropylene capacitors. The output capacitor is also of high quality (polypropylene foil).
Designed without overall feedback. The first and second amplification stages are made up of 12AX7, among which a subsonic filter is put. The third and fourth stages are made up of 12AT7.