★오디오 랜드 블로그로 연결★
Specifications
PERFORMANCE
Recommended amplifier power 20 - 250 Watts
Continuous power handling 125 Watts RMS
Peak power handling 500 watt
Sensitivity 93 dB (2.83 volt @ 1 m)
Nominal Impedance 8 ohm
Minimum Impedance 5 ohm
Frequency Response 29 Hz - 27 kHz (-6 dB)
Dispersion 90 degrees conical
DRIVE UNITS
Dual Concentric™ high frequency 52 mm (2.00") 52 mm (2”) aluminium/magnesium alloy dome with round voice coil
Dual Concentric™ low frequency 250 mm (10”) with paper pulp cone and twin roll impregnated fabric surround.52 mm (2”) round wire voice coil
CROSSOVER
Frequency 1.1kHz
Type Bi-wired, hard-wired passive, low loss. Time compensated.2nd order low pass. 2nd order high pass. Deep cryogenically treated
Adjustment /- 3 dB over 1 kHz to 27 kHz shelving,
2 dB to -6 dB per octave over 5 kHz to
27 kHz slope
CONSTRUCTION
Enclosure type Distributed port
Volume 105L (3.7 cu.ft)
Dimensions 1100 x 406 x 338mm
(43.50 x 16.00 x 13.33" )
Finish Particle board with high density birch ply baffle and rear panel, 18 mm (0.71”) thickness. Internally cross braced and heavily damped.
)
!